Conveyor Belt. Rubber-fabric conveyor belts are used for conveying bulk, lump and packaged cargoes on belt conveyors.

Conveyor belts feature the following parameters:
- Belt type
- Number of insert plies
- Fabric type
- Rubber coating (in mm)

IDENTIFICATION EXAMPLE:
2M-1200-4-TK-200-2-5-2-M-RB GOST 20-85
Belt type - 2M
Belt width - 1200mm
Number of insert plies - 4 pcs
Fabric type - TK-200-2
Carrying-side cover thickness - 5mm
Back cover thickness - 2mm
Cold-resistant rubber grade - M
Rubber edge surface - RB

Conveyor Belt Structure:

1 – Carrying-side rubber cover
2 – Fabric insert ply (basic structure)
3 – Back rubber cover

Belt Types:
General purpose
Cold-resistant
Heat-resistant
Hardly inflammable
Food

Belts of four types are produced as follows:

Type 1 belts are produced with rubber coatings of working and non-working surfaces, as well as with rubber edge surfaces for extreme and severe operation conditions.

Type 2 belts are produced with rubber coatings of working and non-working surfaces.

Type 3 belts are produced with rubber coatings of working surface and cut edges; type 3 belts can also be produced with a lower fabric insert ply folded around the body edge onto the belt working surface.

Type 4 belts are produced with rubber coatings of working and non-working surfaces, as well as with rubber edge surfaces. Conveyor belts are delivered in 100 linear meter coils, 125 to 1400mm wide. Number of fabric insert plies is from 2 up to 8.